🎉 Up to 70% Off Selected ItemsShop Sale
1 / 5
Dynamic Dollies Laser 4000
Manufacturer part #: 14207
This style is made for heavier sprit boats, e.g., Topper Omega, RS Vision, RS Venture, and Laser Bahia.
Tough, UV-protected, injection-molded ,through-bolted, plastic joint components.
1 1/2" square structural-grade, anodized aluminum with boat-friendly round corners.
Delrin ball bearings in wheel hub result in easy rolling on rough surfaces or deep sand.
Split bow tube allows for extension of bowsprit and unhindered launching and dousing of asymmetric spinnaker on land.
Boat-specific tube and sling lengths provide a custom fit for each boat, enabling a balanced handle load and easy maneuvering.
All joint fittings are through-bolted and designed for increased torque stability.
Strong, 3" non-stretch, polyester sling provides wrap-around boat support.
Round aluminum tubes covered with a plastic hose prevent boat and aluminum contact.
Eyelets on sling and handle fittings facilitate securing boat to dolly in storage, on trailers or in racks. Tie-down with the handle fitting eyelet helps prevent slippage on steep ramps.
Easy dolly breakdown using the snap buttons on wheel shaft and tongue tubes, as well as wing nuts on axle tube cross fitting.
Pneumatic, non-corrosive, 16" x 4" wheels can be secured on wheel shaft with provided screws for added security. For soft sand conditions, tire pressure can be reduced to increase tire footprint.
Proudly made in the USA.
Call us for technical support, customer service and product information (877) 240-VELA (8352)
This style is made for heavier sprit boats, e.g., Topper Omega, RS Vision, RS Venture, and Laser Bahia.
Tough, UV-protected, injection-molded ,through-bolted, plastic joint components.
1 1/2" square structural-grade, anodized aluminum with boat-friendly round corners.
Delrin ball bearings in wheel hub result in easy rolling on rough surfaces or deep sand.
Split bow tube allows for extension of bowsprit and unhindered launching and dousing of asymmetric spinnaker on land.
Boat-specific tube and sling lengths provide a custom fit for each boat, enabling a balanced handle load and easy maneuvering.
All joint fittings are through-bolted and designed for increased torque stability.
Strong, 3" non-stretch, polyester sling provides wrap-around boat support.
Round aluminum tubes covered with a plastic hose prevent boat and aluminum contact.
Eyelets on sling and handle fittings facilitate securing boat to dolly in storage, on trailers or in racks. Tie-down with the handle fitting eyelet helps prevent slippage on steep ramps.
Easy dolly breakdown using the snap buttons on wheel shaft and tongue tubes, as well as wing nuts on axle tube cross fitting.
Pneumatic, non-corrosive, 16" x 4" wheels can be secured on wheel shaft with provided screws for added security. For soft sand conditions, tire pressure can be reduced to increase tire footprint.
Proudly made in the USA.
Call us for technical support, customer service and product information (877) 240-VELA (8352)
Manufacturer part #: 14207
This style is made for heavier sprit boats, e.g., Topper Omega, RS Vision, RS Venture, and Laser Bahia.
Tough, UV-protected, injection-molded ,through-bolted, plastic joint components.
1 1/2" square structural-grade, anodized aluminum with boat-friendly round corners.
Delrin ball bearings in wheel hub result in easy rolling on rough surfaces or deep sand.
Split bow tube allows for extension of bowsprit and unhindered launching and dousing of asymmetric spinnaker on land.
Boat-specific tube and sling lengths provide a custom fit for each boat, enabling a balanced handle load and easy maneuvering.
All joint fittings are through-bolted and designed for increased torque stability.
Strong, 3" non-stretch, polyester sling provides wrap-around boat support.
Round aluminum tubes covered with a plastic hose prevent boat and aluminum contact.
Eyelets on sling and handle fittings facilitate securing boat to dolly in storage, on trailers or in racks. Tie-down with the handle fitting eyelet helps prevent slippage on steep ramps.
Easy dolly breakdown using the snap buttons on wheel shaft and tongue tubes, as well as wing nuts on axle tube cross fitting.
Pneumatic, non-corrosive, 16" x 4" wheels can be secured on wheel shaft with provided screws for added security. For soft sand conditions, tire pressure can be reduced to increase tire footprint.
Proudly made in the USA.
Call us for technical support, customer service and product information (877) 240-VELA (8352)
This style is made for heavier sprit boats, e.g., Topper Omega, RS Vision, RS Venture, and Laser Bahia.
Tough, UV-protected, injection-molded ,through-bolted, plastic joint components.
1 1/2" square structural-grade, anodized aluminum with boat-friendly round corners.
Delrin ball bearings in wheel hub result in easy rolling on rough surfaces or deep sand.
Split bow tube allows for extension of bowsprit and unhindered launching and dousing of asymmetric spinnaker on land.
Boat-specific tube and sling lengths provide a custom fit for each boat, enabling a balanced handle load and easy maneuvering.
All joint fittings are through-bolted and designed for increased torque stability.
Strong, 3" non-stretch, polyester sling provides wrap-around boat support.
Round aluminum tubes covered with a plastic hose prevent boat and aluminum contact.
Eyelets on sling and handle fittings facilitate securing boat to dolly in storage, on trailers or in racks. Tie-down with the handle fitting eyelet helps prevent slippage on steep ramps.
Easy dolly breakdown using the snap buttons on wheel shaft and tongue tubes, as well as wing nuts on axle tube cross fitting.
Pneumatic, non-corrosive, 16" x 4" wheels can be secured on wheel shaft with provided screws for added security. For soft sand conditions, tire pressure can be reduced to increase tire footprint.
Proudly made in the USA.
Call us for technical support, customer service and product information (877) 240-VELA (8352)
$725.00
Dynamic Dollies Laser 4000—
$725.00
Description
Manufacturer part #: 14207
This style is made for heavier sprit boats, e.g., Topper Omega, RS Vision, RS Venture, and Laser Bahia.
Tough, UV-protected, injection-molded ,through-bolted, plastic joint components.
1 1/2" square structural-grade, anodized aluminum with boat-friendly round corners.
Delrin ball bearings in wheel hub result in easy rolling on rough surfaces or deep sand.
Split bow tube allows for extension of bowsprit and unhindered launching and dousing of asymmetric spinnaker on land.
Boat-specific tube and sling lengths provide a custom fit for each boat, enabling a balanced handle load and easy maneuvering.
All joint fittings are through-bolted and designed for increased torque stability.
Strong, 3" non-stretch, polyester sling provides wrap-around boat support.
Round aluminum tubes covered with a plastic hose prevent boat and aluminum contact.
Eyelets on sling and handle fittings facilitate securing boat to dolly in storage, on trailers or in racks. Tie-down with the handle fitting eyelet helps prevent slippage on steep ramps.
Easy dolly breakdown using the snap buttons on wheel shaft and tongue tubes, as well as wing nuts on axle tube cross fitting.
Pneumatic, non-corrosive, 16" x 4" wheels can be secured on wheel shaft with provided screws for added security. For soft sand conditions, tire pressure can be reduced to increase tire footprint.
Proudly made in the USA.
Call us for technical support, customer service and product information (877) 240-VELA (8352)
This style is made for heavier sprit boats, e.g., Topper Omega, RS Vision, RS Venture, and Laser Bahia.
Tough, UV-protected, injection-molded ,through-bolted, plastic joint components.
1 1/2" square structural-grade, anodized aluminum with boat-friendly round corners.
Delrin ball bearings in wheel hub result in easy rolling on rough surfaces or deep sand.
Split bow tube allows for extension of bowsprit and unhindered launching and dousing of asymmetric spinnaker on land.
Boat-specific tube and sling lengths provide a custom fit for each boat, enabling a balanced handle load and easy maneuvering.
All joint fittings are through-bolted and designed for increased torque stability.
Strong, 3" non-stretch, polyester sling provides wrap-around boat support.
Round aluminum tubes covered with a plastic hose prevent boat and aluminum contact.
Eyelets on sling and handle fittings facilitate securing boat to dolly in storage, on trailers or in racks. Tie-down with the handle fitting eyelet helps prevent slippage on steep ramps.
Easy dolly breakdown using the snap buttons on wheel shaft and tongue tubes, as well as wing nuts on axle tube cross fitting.
Pneumatic, non-corrosive, 16" x 4" wheels can be secured on wheel shaft with provided screws for added security. For soft sand conditions, tire pressure can be reduced to increase tire footprint.
Proudly made in the USA.
Call us for technical support, customer service and product information (877) 240-VELA (8352)
